Ο ΛΟΓΑΡΙΑΣΜΟΣ ΜΟΥ Πατήστε εδώ για να συνδεθείτε ή
ΚΑΛΑΘΙ ΑΓΟΡΩΝΑυτή τη στιγμή στο καλάθι σας 0 προϊόντα.
ΑΝΑΖΗΤΗΣΗ
ΕΠΙΛΕΓΜΕΝΕΣ ΚΑΤΗΓΟΡΙΕΣ
  • EKWB EK-UNI Pump Bracket (120mm FAN) Vertical
    10.90€
  • EKWB EK-UNI Holder DDC Spider (120mm FAN)
    5.35€
  • EKWB EK-RES X3 - TUBE 150 (104mm)
    10.90€
  • Phobya Radiator Grill Dual 240 Stripes Black
    13.50€
  • Alphacool HardTube 10/13mm Plexi Clear 40cm
    3.79€
  • Phobya Noise Destructor V.1 for Pump Decoupling
    5.99€
ΣΧΕΤΙΚΕΣ ΚΑΤΗΓΟΡΙΕΣ
Εξέλιξη παραγγελίας
Skroutz.gr Partner
 
Συστήματα Ψύξης / Watercooling / Watercooling Accessories / Tubing Accessories / Nanoxia CF Rubber Core 12/10 for Hard Tubes [Κωδικός 293702] [Mpn CF1-PETG550] [Ean 4260285293702]
Κατηγορία:  Tubing Accessories 
Nanoxia CF Rubber Core 12/10 for Hard Tubes


This approx. 52 cm long Rubber Core is perfectly suited to be used with the separately sold Coolforce PETG Tubes. When using a heat source, like a heat gun, the PETG Tubes easily can be bended or deformed. With a little technical skill, it is thereby possible to create a truly individual water cooling system. In order to prevent the PETG Tubes (or acrylic tubes as well) from folding over after being heated, we offer this Rubber Core.


Άμεσα διαθέσιμο
 7.90€  


Επίσημη ιστοσελίδα προϊόντος

Μόνο 4 διαθέσιμα τεμάχια








Είδος Acrylic Tube D.I.Y  
Μήκος Προϊόντος 52cm  
Μέγιστο Εσωτερικό Μέγεθος Σωλήνα 10mm  
Τεμάχια στη Συσκευασία 1  
Υλικό Κατασκευής Silicone  
Χρώμα Μαύρο  

Under the label "Coolforce - powered by Nanoxia“ we present selected water cooling components for demanding water cooling enthusiasts. 

This approx. 52 cm long Rubber Core is perfectly suited to be used with the separately sold Coolforce PETG Tubes. When using a heat source, like a heat gun, the PETG Tubes easily can be bended or deformed. With a little technical skill, it is thereby possible to create a truly individual water cooling system. In order to prevent the PETG Tubes (or acrylic tubes as well) from folding over after being heated, we offer this Rubber Core. 

It gives the tube the necessary stability, to reach the level of bending that is desired without breaking it. To do that, simply insert the Rubber Core into the tube, before you heat it up, and remove it, when the tube has cooled off again. 

The Rubber Core can be used with the Coolforce PETG Tubes or other acrylic tubes with an inner diameter of 10 mm. The length is 52 cm.